1, a reasonable treatment of wheat straw. After the harvest of wheat, harvesters equipped with straw chopping and dispersal devices should be used as far as possible, or maize no-tillage seeders with stubble-killing function should be selected at the time of corn sowing, and straw smashing, stubble killing and corn sowing can be completed at once. Items. The length of the wheat straw should not exceed 10 cm, and the wheat straw should be uniformly distributed.
2, early broadcast when grab. Linfen County is planted with “wheat and corn two-maturity†planting, and the time for sowing summer corn after wheat is harvested is generally tight, because sowing preparation work is done well in advance, and wheat harvest is sown in time.
3, improve the quality of sowing. The quality of sowing depends on the quality of seeds, the quality of sowing machinery and other factors. Sowing depth is generally controlled at 3-4 cm, spacing 60-66 cm. When planting, it is necessary to have the same row spacing and consistent depth. Avoid missed broadcasts and rebroadcasting. Sowing operations must be slow and smooth.
4, pouring a good "covered water." Water is very important to ensure the normal emergence of summer corn seed. Since the wheat is harvested in order to grab the early sowing, it is generally too late to pour water. Therefore, after the sowing of the corn field without pouring into the bottom, be sure to pour the “headwaterâ€. Ensure moisture supply.
2, early broadcast when grab. Linfen County is planted with “wheat and corn two-maturity†planting, and the time for sowing summer corn after wheat is harvested is generally tight, because sowing preparation work is done well in advance, and wheat harvest is sown in time.
3, improve the quality of sowing. The quality of sowing depends on the quality of seeds, the quality of sowing machinery and other factors. Sowing depth is generally controlled at 3-4 cm, spacing 60-66 cm. When planting, it is necessary to have the same row spacing and consistent depth. Avoid missed broadcasts and rebroadcasting. Sowing operations must be slow and smooth.
4, pouring a good "covered water." Water is very important to ensure the normal emergence of summer corn seed. Since the wheat is harvested in order to grab the early sowing, it is generally too late to pour water. Therefore, after the sowing of the corn field without pouring into the bottom, be sure to pour the “headwaterâ€. Ensure moisture supply.
Tof(Time-of-flight), is JRT new product, which is a single-point LiDAR sensor. With a micro size of 46x17x7mm, customers can widely use in many Laser Measurement Solutions. The lidar distance sensor can measure 12m short-range. It's great for Unmanned Aerial Systems.Contact Us Now for data sheet.
| Product Name | Tof LiDAR Sensor |
| Model Number | IT02S-65-A/IT02S-65-B/IT03M-650 |
| Measuring Range (without Reflection) | 0.1-12m/0.1-10m/0.1-15m(90% reflectivity) |
| Place of Origin | China |
| Accuracy | 2cm~4cm/5cm |
| Blind Area | 10cm |
| Resolution | 1cm |
| Measuring Unit | centimetre |
| Laser Class | Class II, red |
| Laser Type | 650nm, <1mW |
| Communication Interface | UART, 115200bps(default) |
| Size | 46*17*7mm/50*26*13mm |
| Weight | About 4g/10g |
| Voltage | 2.7V~+3.6V |
| Electrical Level | TTL/CMOS |
| High Frequency | 100hz |
| Operating Temperature | 0-40 ℃ (32-104 ℉ ) |
| Storage Temperature | -25~60 ℃ (-13~140 ℉) |
ToF Sensor,Time of Flight Sensor,LiDAR Distance Sensor,ToF Distance Sensor
Chengdu JRT Meter Technology Co., Ltd , https://www.infrareddistancesensor.com