Since the beginning of the 1980s, the large-scale application of capsule filling machines in the production of hard capsules in the country has gone through several processes: from the original artificial ladder to the conveyor belt, from the barrel to the positive Pressure delivery, from vacuum delivery to automatic vacuum delivery, in addition to cross-layer air control self-weight delivery. The development of these processes shows the progress made by the way of loading and unloading.
Nowadays, in the production of domestic solid preparations, capsule filling machines are mainly based on automatic vacuum feeders, except for a few people who still use artificial ladders to dump or other methods of loading. This method has the following characteristics compared with other feeding methods. :
1. The hopper is integrated with the vacuum source, compact and compact, no dust pollution and low noise;
2, the installation is simple, can be installed anywhere, only need 220V power supply;
3, the operation is simple, the automatic vacuum feeding device is fast, and the conveying amount can be adapted to the filling capacity of the capsule filling machine;
4. The mechanical cleaning method is adopted on the cleaning of the adsorbent of the filter medium, instead of the compressed air backflushing method commonly used by similar equipment, thereby avoiding the pollution caused by the contact of the compressed air with oil or water. Compressed air has specific requirements (such as oil content less than 0.3%, dust particles less than 0.01μm), but also eliminates the installation and operation costs of compressed air pipelines;
5. The vacuum feeding material can basically reach the delamination problem of no mixed materials;
6, can be applied to the clean workshop of the usual 2.7m height.
The automatic vacuum feeder is applied on the capsule filling machine. It is a comprehensive feature that cannot be replaced by other feeding mechanisms in terms of practicality and economy, but it is invincible in the industry. Still need to continue to innovate and develop.
Nowadays, in the production of domestic solid preparations, capsule filling machines are mainly based on automatic vacuum feeders, except for a few people who still use artificial ladders to dump or other methods of loading. This method has the following characteristics compared with other feeding methods. :
1. The hopper is integrated with the vacuum source, compact and compact, no dust pollution and low noise;
2, the installation is simple, can be installed anywhere, only need 220V power supply;
3, the operation is simple, the automatic vacuum feeding device is fast, and the conveying amount can be adapted to the filling capacity of the capsule filling machine;
4. The mechanical cleaning method is adopted on the cleaning of the adsorbent of the filter medium, instead of the compressed air backflushing method commonly used by similar equipment, thereby avoiding the pollution caused by the contact of the compressed air with oil or water. Compressed air has specific requirements (such as oil content less than 0.3%, dust particles less than 0.01μm), but also eliminates the installation and operation costs of compressed air pipelines;
5. The vacuum feeding material can basically reach the delamination problem of no mixed materials;
6, can be applied to the clean workshop of the usual 2.7m height.
The automatic vacuum feeder is applied on the capsule filling machine. It is a comprehensive feature that cannot be replaced by other feeding mechanisms in terms of practicality and economy, but it is invincible in the industry. Still need to continue to innovate and develop.
The best choice for Analog hearing aids with earbuds design
TWS Hearing aids,TWS Hearing amplifier,TWS Hearing Earbuds
Shenzhen Sunshine Technology Co.,Ltd , https://www.yatwin.com