(1) Avoid spraying fog or dripping. This issue is often caused by a clogged strainer inside the housing, or by blockage in the slanted hole of the spray nozzle. Regular cleaning and inspection can help prevent such problems.
(2) Water and gas are sprayed at the same time during operation. A typical cause is a broken or loose infusion tube inside the barrel, or corrosion due to prolonged exposure to chemical solutions. Checking the integrity of the tubing is essential for proper function.
(3) The spray mist appears scattered instead of forming a cone shape. This usually happens when the nozzle hole is damaged or blocked by dirt or residue. Cleaning the nozzle regularly and ensuring it's properly aligned can improve performance.
(4) The air cylinder fails to draw in air. One common reason is that the cup has shrunk or hardened over time, leading to cracks or breakage. Another possibility is that the screw at the bottom of the cup has come loose, causing the cup to detach. Replacing worn parts is recommended.
(5) There is a leak from the gas cylinder cap or water cap. This is usually due to a loose or damaged seal. Tightening the cap or replacing the sealing ring can resolve the issue.
(6) The stopper rod and gland cover experience water leakage. This may be caused by desoldering between the cylinder wall and the pump base, or by dirt blocking the steel ball in the valve housing, preventing it from sealing properly. Ensuring all connections are secure and clean is important.
(7) The switch leaks. This typically occurs due to damage to the switch itself or aging of the asbestos rope under the switch cover. If the switch feels loose or unresponsive, it should be inspected and replaced if necessary.
By understanding these common issues and performing regular maintenance, you can significantly extend the life of your equipment and ensure it operates efficiently. Always follow the manufacturer’s guidelines and use proper tools when making repairs or adjustments.
Rabies Vaccine After Animal Bite
Rabies is a viral infection transmitted by saliva of infected mammals, most commonly wild, terrestrial carnivores (e.g., skunks, raccoons, foxes, coyotes) or bats.rabies virus usually moves along a neural pathway and enters the CNS. After entrance into the CNS, the virus is unlikely to be affected by antirabies antibodies and encephalomyelitis usually develops and almost always is fatal. Vaccination of rabies vaccine in a timely manner is mandatory.
Rabies Vaccine After Animal Bite,Animal Bite Rabies Vaccine,Freeze Animal Bite Rabies Vaccine,Freeze Rabies Vaccine After Animal Bite
Changchun Zhuoyi Biological Co., Ltd , https://www.zhuoyi-bio.com