The use of plant protection machinery should pay attention to the problem

(1) Machine preparation 1 Correctly select the type of sprayer, the type of spray nozzle, and the size of the spray hole according to the requirements of the control object and spray operation. For example, in the case of pest control in Daejeon, hydraulic sprayers and conical fog nozzles were selected. Weeding spray should be used sprayer, fan-shaped spray head. Fruit trees, sidewalk trees should use spray guns, high pressure, hydraulic sprayers, or airborne sprayers.
2 Check the equipment before operation to ensure that all parts are smooth, switchable, and well atomized. Each part is in good technical condition.
3 According to the spray pressure during normal operation and the determined nozzle spray, the flow rate (l/min) of each nozzle is measured and the total flow is equal to the sum of the flow rates of the respective nozzles.
4 trial spray. Check if it works properly.
(2) Spraying operation 1 The calculation of the walking speed. According to the requirements of agricultural technology, the unit's walking speed V is calculated as follows:
V = 40 nozzle flow (liters per minute) / spray (meters) per acre (l/min)
The speed of travel - determined and must not be arbitrarily changed - is an important parameter for ensuring the effectiveness of spraying.
2 The height of the nozzle from the target determines the height of the nozzle from the target according to the nozzle used.
3 walking method. - General use of shuttle method, and pay attention to the connection of adjacent work width.
4 Safety technology in operation. Safety equipment should be worn. Eating and drinking are forbidden during work. Before work is completed, it should be washed thoroughly before eating. Changes in wind direction during operation should be taken care of; splashing should be taken during dosing; liquid containers should be handled in time. Can't throw it anywhere.

Bleach Clean-up Enzyme is developed to remove residual hydrogen peroxide.Usually the cotton fabric bleached with hydrogen peroxide, the bleaching chemicals must be removed before dyeing in order to avoid the reaction between the bleaching agent and the dye. The traditional way to remove bleach is to rinse the fabric several times with water. Alternatively, you can use a mild reducing agent to clean the bleach. In addition, a large amount of water is needed in rinsing which wash out a large amount of wastewater.

Conzyme CAT200 is an extremely high concentrated liquid catalase preparation. It is specially developed to remove residual hydrogen peroxide and improve the last preparation prior to dyeing; it can largely reduce hazardous chemicals usage and save water.

Benefits:

Complete removal of residual H2O2 in preparation for dyeing
Wide pH range, convenient in using
No damage of fabric
Reduce processing time
Reduce water consumption and effluent volume

Environmental-friendly & bio-degradation


Enzyme preparations belong to protein, which may induce sensitization and cause anaphylaxis in sensitized individuals. Long-term exposure may cause minor irritation for skin, eyes or nasal mucosa, so any direct contiguity with human body should be avoided. If irritation or allergic response for skin or eyes develops, consult a doctor.

Bleach Clean-up Enzymes

Bleach Clean-Up Enzymes,Catalase Enzyme,Enzyme For Peroxide Clean Up,Bleach Inhibitor

Sunson Industry Group Co., Ltd , http://www.sunsonchinaenzymes.com

Posted on