The company's technicians introduced the jinbao dry-type fermentation bed (for details, please click): The high humidity of the fermentation bed and the wet material of the pad are one of the more common problems in the fermentation bed culture process. It is common and common, and when it is solved, it is simple. Easy to do. This article will do a detailed analysis and answer on this issue for the reference of major breeding friends!
One, the reasons for excessive humidity in the fermentation bed
1, the breeding density is too large: a reasonable breeding density is the key factor to ensure the normal operation of the fermentation bed. There is a limit to the amount of excrement and urine in the fermentation bed. If the amount of excreta is too large, it will not be decomposed, resulting in the accumulation of excrement and dull mats. Therefore, in the daily feeding and management process, it is necessary to control the breeding density of animals, and should not be too large, so as not to cause the decomposition of urine and urine in time.
2. The irrational way of overturning: The moisture of the fermented mattress material is mostly damp (10-15cm) or local moisture. The reason for this phenomenon is mainly caused by the unreasonable method of overturning. When it is actually overturned, it should be deep-turned (30-35cm), and be exchanged (convert wet litter and dry litter, and then overturn it. Turn over the litter with a goldfish fermentation bed overturn machine. More time and labor).
3, poor ventilation: ventilation is the main way to solve the wet. However, if the ventilation is restricted, too much water vapor cannot be discharged in time, the evaporation rate will slow down, and the phenomenon of moisture will follow.
4. Water from outside the excreta enters: extra water such as rainwater, drinking water, and dripping water from the house enters the fermentation bed, causing the fermented mattress material to be wet. Therefore, attention should be paid to the infrastructure management of the housing.
Second, solve the problem of fermented mattress material moisture
1. Strengthen the ventilation of the house: Ventilation can well reduce the humidity of the air, increase the evaporation rate, and can well prevent the damp of the litter.
2. Control of stocking density: In many cases, the reason for the high humidity of the litter is that the stocking density is too large, the amount of the feces is too much, and the decomposition of the feces and urine is not timely. Therefore, the fermentation bed culture must control the amount of culture within the unit and ensure that the manure can be decomposed in a timely manner, and the density cannot be increased at random as in traditional culture.
3, increase the frequency of overturning: Diligent flip litter is also a good way to reduce the humidity of the litter, generally guaranteed to fall 1-2 times a week, while overturning should pay attention to strengthen ventilation.
4. Add or replace moist litter: This is the most thorough way to solve the problem of wet litter. For wet parts of the bedding, we can add some dry bedding to reduce the humidity, or we can directly replace the wetted bedding to ensure that the bedding of the bedding is dry.
5, do a good job in the management and maintenance of housing, to prevent additional water into the fermentation bed.
More details about the exciting content of fermentation bed, fermentation agent, microbial fungus, etc., please pay attention to the Jinbao fermentation bed official website () Huaxia Taoyuan Taobao factory shop (bjhxky.taobao.com) or call our hotline: 010-62110749 63623048 13269217468 Free hotline
Laminate Panel Security Door,Apartment Security Door,Laminate Exterior Security Door,Laminate Entry Security Door
Zhejiang Tilanco Industry&Trade Group Co., Ltd , https://www.tilancogroup.com