The promotion of ducks in fermentation beds has been recognized by more farmers and regional authorities, and more duck farmers have begun to use and prepare to use ducks in fermentation beds. Is the traditional duck house a suitable breeding bed for ducks, and if the original housing is used for the fermentation of ducks, what changes are needed in the duck house?
1, duck housing window renovation
Add roof-mounted tower-type skylights on the roof, non-powered fans and powered fans alternately install sunroofs at intervals of 4-5 meters to increase ventilation and ventilation of the houses to help discharge ammonia gas and moisture; both sides of the house They are generally open-type, using lifting plastic film for heat preservation and ventilation. When the curtain is lowered, it is necessary to reduce the plastic film to the lowest end, or to roll up from the bottom to achieve ventilation on the bed surface, and to form a convection effect with the skylight.
2, duck house ventilation cooling
The duck house can be equipped with a 1.4*1.4 induced draft fan, which is conducive to ventilation and cooling in the summer. An induced draft fan can pull the ventilation of the 60-70 meters of the house in the quarters to increase the summer ventilation and cooling conditions; conditional The sheds can add curtains and cool down in the summer to ensure that the temperature in the duck sheds is not too high.
3, duck house ground transformation
The traditional fermentation bed culture generally adopts the cement farming mode, and then uses a manure machine or a water flushing method to excrete. If a duck is used in a fermentation bed, it is necessary to remove the original cement floor chopped and ensure the fermentation mattress material and the ground. Breathability, if the concrete floor is thick, can be taken in the form of holes in the ground for transformation. In addition, the differences between North and South are different. The northern duck cans can use underground or semi-underground fermentation beds. The southern high-humidity ground can use ground-based fermentation beds to prevent excessive moisture or rain immersion.
4, duck house water line transformation
The duck house water line can be on both sides of the house. The width of the traditional water tank watering line is recommended to be 80-100cm. It should not be too wide, to ensure that the waterline water does not enter the fermentation bed, otherwise the water is too big to cause the fermentation bed. The nipple type waterline can also be used. Compared with the traditional waterline, it is more water-saving and occupies less land. The width of the nipple waterline can be controlled at about 30cm. In addition, the house should be rain-proof on the roof, and there must be a drainage ditch around it to prevent rain from flooding into the fermentation bed. The cost of retrofitting is relatively small. The fan is usually 50-60 yuan, and the cost of the induced draft fan is a little higher than 1,000. Labor costs, conditions can be used according to their own conditions, the use of more advanced facilities for transformation.
The general principles for the transformation of a duck bed in a fermentation bed are ventilated and waterproof. In addition, due to the differences in housing and housing in different places, the transformation of duck houses should be based on the conditions of their own duck houses and the rational use of existing facilities. Some duck houses are not worth rebuilding, so they are not as good as new duck houses. More details about the exciting content of fermentation bed, fermentation agent, microbial fungus, etc., please pay attention to the Jinbao fermentation bed official website () Huaxia Taoyuan Taobao factory shop (bjhxky.taobao.com) or call our hotline: 010-62110749 63623048 13269217468 Free hotline.
Co2 Fire Valve,Co2 Fire Extinguisher Valve,Valve Fire Extinguisher,Fire Fighting Valves
NINGBO TOMAN IMP. & EXP. CO., LTD , https://www.tdotmfiresolution.com