How to plant spring wheat?

Due to the heavy rainfall in Huanghuai winter wheat region last year, a large number of lake depressions, cotton fields, etc., delayed wheat cultivation due to water accumulation in the autumn or late fall. Many peasant friends came to the telephone and asked if there were any crops that were sown in spring and matured in the summer without delaying the summer crop. Spring wheat is a more suitable crop, but according to the author's knowledge, there are few spring wheat varieties suitable for planting in Huanghuai winter wheat region. The author talked about how to use the semi-winter varieties to grow good spring wheat for reference by farmers.
First, understand the varieties of winter wheat seed germination in the soil, must be after a certain period of time the low temperature conditions in order to get up and joint development and the formation of a solid organ, this period of time called the vernalization of wheat. The temperature required for winter varieties to pass through the vernalization stage is low, generally between 0°C and 3°C, and lasts for 40-45 days. The temperature required during the vernalization stage of semi-wintering cultivars is generally 3°C to 6°C, and the elapsed time is 10 days to 15 days. Varieties from the midwinter can also pass vernalization above 8°C, but plant heading is slower. Spring varieties have higher temperatures through the vernalization stage, generally at 7°C to 15°C, and can pass vernalization within 5 to 8 days. Therefore, in the absence of spring varieties suitable for planting, it is advisable to use a semi-winter variety.
Second, to solve the problem of vernalization In order to make wheat pass vernalization as soon as possible and mature in time, the following methods can be used:
1. Sow early. Before and after the Spring Festival, when the temperature is high, when the local surface is frozen about 6 cm deep, you can seize the opportunity to sow. In the future, the wheat seeds germinate through vernalization, and they generally mature in time.
2. The germinating seeds are treated at a low temperature of 0 to 5°C for 10 to 25 days before sowing and then sown. During cold treatment, pay attention to the ventilation and ventilation of the seeds. It is not appropriate to use plastic sheets or other airtight materials to wrap them too tightly, because the seeds will increase in respiratory intensity after germination.
Third, understanding the reproductive characteristics of spring wheat
1. The growth period is short. Spring wheat lasts for more than 90 days from sowing to harvesting.
2. The period of vegetative growth is short. The spring sowing temperature of spring wheat ranges from low to high, and the sun shines from short to long. It quickly enters the light stage through the vernalization stage, and it takes about 20 days from the emergence to the single-edge period.
3. The period of delivery is short, the time from emergence to jointing is very short, the number of tillers is small, and the rate of tillering and spike formation is very low.
4. The root system is shallow and weak, and it is prone to premature aging due to defertilization and lack of water.
5. Early ear differentiation, generally four leaves into the two-legged, five-leaf floret differentiation.
Fourth, spring wheat cultivation techniques
1. Article fertilization, fertilizer care species. Before sowing, the strips were applied to a depth of 9 cm below the ground, and then the seeds were sown to a depth of 3 to 4 cm. When the wheat germs were exhausted during the three-leaf period, the fertilizer was just on the supply of fertilizer.
2. Apply base fertilizer. If you prepare before winter, apply 2,000 kg of organic fertilizer, 15 kg of ammonium phosphate, and 15 kg of urea per acre. Spread them evenly into the ground and immediately plough them in order to achieve “rich in the tires” and a depth of 20-25 cm. Unprepared before the winter, apply 30 to 50 kilograms of standard nitrogen fertilizer per acre (due to appropriate changes in soil fertility), standard phosphate fertilizer 30 to 50 kilograms, potassium and trace amounts of fertilizer.
3. Timely early broadcast, narrow line spacing. The sooner the spring wheat sowing is, the better the anti-freezing ability of wheat in the vernalization stage is. Spring wheat has fewer tillers and smaller individuals, and it can get high yields by dense planting. Generally about 17 centimeters is appropriate, or the size of the line, big line 20 centimeters, small lines 13 to 15 centimeters. The seeding rate depends on the weight of seeds, germination rate and the number of ears per mu. Generally, the number of ears per mu is about 350,000 spikes. It is advisable that the sowing amount is about 20 kg. Poor soil fertility or poor plague may increase the sowing amount appropriately.
4. Manage early. The nutrients in the endosperm of the three-leaf stage of spring wheat are used up, but also in the stage of spike differentiation and tillering, which requires a large amount of nutrients. Spring rain is less, wheat seedlings can not cover the ground, the ground is exposed, running fast. Therefore, early spring fertilizer management, early irrigation, promote early delivery. Two-leaf one-heart irrigation water, combined with poor fertility topdressing 35 ~ 40 kg of ammonium bicarbonate, or 15 kg of urea, good fertility to postponed until the jointing stage. In principle, the second water should be followed immediately after the headwaters, separated by 10 to 15 days. After the two waters, the three waters must be slowed down, and the three waters are generally filled after the second quarter is established and ineffective.
5. Pouring grouting water. Pay attention to rainy days and windy days during the grain filling period to prevent the lodging of wheat. After the wheat has been flowered, pour it in water every 15 days or so.
6. Pay attention to pest control. As the stems and leaves of spring wheat are tenderer than winter branches, they are more susceptible to pests and diseases. Therefore, spring wheat must strengthen pest control more than winter wheat.

Raw Steroids can be made into injectable or oral products. Many Pct Steroids are take in oral forms. In the market, only injectable products are sold as semi-finished oil. There is no semi-finished products for orals, they only sell as raw steroids or finished products. Besides raw steroids, you can also find Human Growth Hormone, Bodybuilding Peptides, Sarms Raws in the market. You need to choose proper products according to your fitness goals and your body condition. Once an athlete finishes an steroid cycle, another crucial stage begins, the Post Cycle Therapy. It helps to restore ones natural testosterone production to bring about a better environment for overall health and to maintain muscle tissue. 


Clomiphene citrate (clomid) and tamoxifen (nolvadex) can be employed post cycle to help restore the users` natural testosterone production. Because both are able to block oestrogen at the hypothalamus and pituitary, thus ceasing negative feedback inhibition, we have drugs that can successfully increase FSH (follicle stimulating hormone) and LH (luteinizing hormone) in the male body. Increased LH can help to stimulate the Leydig's cells in the testes to produce more testosterone.

As an alternative to Clomid, which has been reported to have led to unwanted side effects such as visual disturbances in some users, Nolvadex can be employed.Nolvadex is more profound in stimulating an increase of LH than clomid. Some users like to use both of them in their PCT in an attempt to cover all angles.

Letrozole,brand name,Femara.This medication used to treat certain types of breast cancer (such as hormone-receptor-positive breast cancer) in women after menopause. Also,used for PCT , Letrozole decreases the amount of estrogen the body makes and helps to lessen the reaction of feminization.
Letrozole ( third generation) is a non steroidal selective third generation aromatse inhibitor which just like Arimadex will not give off androgenic effects. Its very similar to Arimadex which why they both are called Type2 non-sterodial competitive aromatase inhibitor. The main difference between Femara and Arimadex is that Femara is more potent,and with competitive price.Now the benefits of letrozole is that if estrogen is starting to irritate the glandular tissue of the breast tissue, letrozole if presented on time will clear up the issues at hand,will be able to get rid of the gyno. Remember do not use during PCT as its detrimental to one`s libido and lipids, only during cycle and please be careful with it since its extremely anti-estrogenic.

Aromasin, also known by its generic name Exemestane, is primarily formulated to fight against breast cancer that is a rather common health issue among post-menopausal women. It also has the ability to control estrogen levels that can be a possible catalyst for tumors.
In the bodybuilding setting, Aromasin is considered as a suicide aromatase inhibitor (AI), which prevents the aromatase enzyme from functioning like it should. When this happens, the process of aromatization is inhibited and the chance that testosterone will be converted to estrogen becomes extremely low.

When to Implement a PCT Plan

It will be a lot more effective starting a PCT protocol when the androgen levels of the steroids drop, and this will be dependent on the half-life of the compounds the user used during their cycle.

See below for when to start your PCT protocol after ceasing your cycle:

Steroid When to start after last admission Length of PCT
Testosterone Enanthate 2 weeks 3 weeks
Testosterone Cypionate 2 weeks 3 weeks
Testosterone Propionate 3 days 3 weeks
Testosterone Suspension 6-8 hours 3 weeks
Sustanon 3 weeks 3 weeks
Winstrol 12 hours 2/3 weeks
Dianabol 6-8 hours 3 weeks
Trenbolone 3 days 4 weeks
Deca durabolan 3 weeks 4 weeks
Primabolan 14 days 2 weeks
Anavar 8-10 hours 2 weeks


PCT Steroids

Pct Steroids,Arimidex Raws,Clomid Raws,Nolvadex Raws

beststeroidraws Co., Ltd , http://www.beststeroidraws.com

Posted on