Daily maintenance:
1. Before the centrifuge is operated, the power should be cut off and the centrifuge brake should be loosened first. You can manually turn the drum to see if there is any bite.
2. Check for other parts of the loose and abnormal conditions.
3. Turn on the power and start the drive in a clockwise direction (usually about 40-60 seconds from the standstill to normal operation).
4. Usually, after each equipment arrives at the factory, it must be empty for about 3 hours, and it can work without abnormal conditions.
5. The material should be placed as evenly as possible.
6. Must be operated by special personnel, the capacity must not exceed the rated amount.
7. It is strictly forbidden to operate the machine so as not to affect the service life of the machine.
8. After the machine is started, if there is any abnormal situation, it must be stopped to check and repair and repair if necessary.
9. The centrifuge is running at high speed, so it is not possible to touch the drum with the body to prevent accidents.
10. The mesh number of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise the separation effect will be affected. In addition, the filter cloth should be installed in the drum seal groove when installing the filter cloth to prevent the material from running in.
12. In order to ensure the normal operation of the centrifuge, please rotate the parts every 6 months. At the same time, check the running lubrication condition of the bearing, whether there is wear phenomenon; whether the components in the brake device are worn or not, and replace it severely; the bearing cover has no oil leakage.
13. After the machine is used, it should be cleaned and kept clean.
14. Do not separate the non-preservative centrifuge from the highly corrosive materials; in addition, strictly follow the equipment requirements and regulations, non-explosion-proof centrifuges should not be used in flammable or explosive places.
1. Before the centrifuge is operated, the power should be cut off and the centrifuge brake should be loosened first. You can manually turn the drum to see if there is any bite.
2. Check for other parts of the loose and abnormal conditions.
3. Turn on the power and start the drive in a clockwise direction (usually about 40-60 seconds from the standstill to normal operation).
4. Usually, after each equipment arrives at the factory, it must be empty for about 3 hours, and it can work without abnormal conditions.
5. The material should be placed as evenly as possible.
6. Must be operated by special personnel, the capacity must not exceed the rated amount.
7. It is strictly forbidden to operate the machine so as not to affect the service life of the machine.
8. After the machine is started, if there is any abnormal situation, it must be stopped to check and repair and repair if necessary.
9. The centrifuge is running at high speed, so it is not possible to touch the drum with the body to prevent accidents.
10. The mesh number of the filter cloth should be determined according to the size of the solid phase particles of the separated material, otherwise the separation effect will be affected. In addition, the filter cloth should be installed in the drum seal groove when installing the filter cloth to prevent the material from running in.
12. In order to ensure the normal operation of the centrifuge, please rotate the parts every 6 months. At the same time, check the running lubrication condition of the bearing, whether there is wear phenomenon; whether the components in the brake device are worn or not, and replace it severely; the bearing cover has no oil leakage.
13. After the machine is used, it should be cleaned and kept clean.
14. Do not separate the non-preservative centrifuge from the highly corrosive materials; in addition, strictly follow the equipment requirements and regulations, non-explosion-proof centrifuges should not be used in flammable or explosive places.
Skin Repairing,Skin Repairing Cosmetic Raw Ingredients,Skin Repairing Extract Plant,Skin Repairing Cosmetic Powder
Xi'an Natural Field Bio-Technique Co., Ltd. , https://www.naturalnf.com