Clean the air filter. The filter element is first cleaned with diesel oil and then soaked with engine oil, and then assembled after the excess oil drips from the filter. Remove the cylinder head, remove the valve group, wash the soil, remove the rust and grind the valve.
Remove the vortex chamber inserts, clean the impurities, and clear the blocked main orifices and start holes on the inserts.
Remove the connecting rod nut, remove the piston rod set and clean it. Use a copper spatula or a bamboo stick to remove the carbon deposit on the piston.
Release the oil in the oil pan and clean the oil pan and filter with diesel oil. After washing, add the oil mixture (2/3 oil, 1/3 diesel oil), shake the crankshaft for several revolutions, clean the lubrication oil tank, and then release the mixed oil. Add the clean oil to the specified scale position.
Remove the brake, clean the mud from the brake hub and brake pad, dry it, and install it.
Clean the dirt inside the electrical equipment. The coils are dried for inspection of insulation and electrical conductivity. Remove dirt from the poles of the battery and apply butter on the line cards and poles. Unscrew the filling hole cover, clear the ventilation hole, clean the impurities in the battery with distilled water, wash and add electrolyte to charge.
Safety rope
Safety rope
Shandong Binzhou Yong'an Labor Protection Factory , https://www.zhuqiangsafetybelt.com