Microbial detection system filtration equipment parameters
Microbial filtration detection system
1. Technical specifications:
1.1 triple stainless steel filter
1.1.1 using 316 standard stainless steel
1.1.2 Easy to clean and sterilize, can be autoclaved (121 ° C), dry heat sterilization (180 ° C), flame burning sterilization or soaking with alcohol
1.1.3 Each funnel is equipped with a separate switch, which can be filtered separately or simultaneously.
1.1.4 It is highly suitable for operation on a sterile workbench
1.1.5 configurable with a funnel, central vent can be fitted with an air filter
1.1.6 funnel with built-in scale for convenient quantitative addition
1.1.7 With stainless steel filter support pad to ensure that the trapped microorganisms are evenly distributed on the filter surface
1.1.8 Rotary card filter cup change film, can be operated with one hand
1.1.9 Stainless steel funnel capacity: 100ml x3
1.1.10 Material: stainless steel funnel, clip, filter support pad and base, silicone washer and funnel cover seal
1.2 vacuum pump
1.2.1 Oil-free, maintenance-free, low noise piston vacuum pump
1.2.2 Maximum vacuum 90% (100 mbar, 76 Torr)
1.2.3 Maximum flow: ≥30L/min
1.2.4 Maximum operating temperature: 60 ° C
1.3 filter
1.3.1 Use a separate aseptically packaged hydrophilic mixed cellulose ester as a microbiological test filter.
1.3.2 There are grid lines on the membrane to facilitate counting and does not affect colony growth.
1.3.3 The surface of the filter membrane is smooth, no particle pollution, and will not interfere with the experimental results due to particulate matter.
1.3.4 The patch with long colonies can be used as a test record after drying, and it can be permanently stored and meets GMP requirements.
- Standard configuration:
2.1 triple stainless steel filter, including 3 100ml stainless steel filter funnels
2.2 vacuum pump 1
2.3 filter film 200 pieces
2.4 sets of vacuum pump tubes, etc.
2.5 4 liter suction filter bottle 1
2.6 stainless steel filter special tweezers 1
Click on the image to view detailed parameters
Taiwan Luoke Office Xiamen Luoken Instrument Co., Ltd.
Removable Oxygen Cylinder Filling System
Removable Oxygen Cylinder Filling System
Compressed air is purified through the air dryer and filters to a certain level for main plant to work with. Air buffer is incorporated for smooth supply of compressed air thus to reduce fluctuation of compressed air source. The plant produces oxygen with PSA (pressure swing adsorption) technology, which is a time proven oxygen generation method. Oxygen of desired purity at 93%±3% is delivered to oxygen buffer tank for smooth supply of product gas. Oxygen in buffer tank is maintained at 4bar pressure and fill in cylinder with an oxygen booster and compress the oxygen purity to 150bar.
With a customized container, all the parts can be involved in, and removable with a vehicle.
Removable Oxygen Cylinder Filling System,Oxygen For Cylinder Filling,Oxygen Refilling,Oxygen Bottle Refilling Plant
Hunan Eter Medical Co., Ltd. , https://www.eter-tech.com