The twisting machine adopts the static pressure method and adopts the latest principles and technologies of the market. Single-handed operation, adapting to the needs of different varieties and different ingredients, maintains the original state of the protein network structure inherent in the yeast dough, and can ensure the taste of different formula products. The length, thickness and size of the twist can be adjusted freely. The twisting machine is more high-yield, tidy, uniform and beautiful than the general manual production, so that the cost is lower and the sample is better!
Seven tips for using a twist machine:
1. Flatten the machine during operation, connect the power supply, and refuel the gears and lubrication parts before and after starting the machine (external butter, internal hygienic oil). After turning on the machine, look at the correct direction, and then listen to the machine for abnormal sound. .
2. Put the cooking oil on the cutting knife to avoid sticking the knife. The twisting can be cut by pressing the cutting knife on the conveyor belt according to the required length. When cutting, the twisted end of the twist is flattened, and the twist is fried. There is no break in the broken head. The twist can be sent to the oil pan through the conveyor belt.
3. When installing the mold, first invade the mold with cooking oil or water, and then install it on the machine.
4. After starting the machine, add cooking oil to the oiling hole. When refueling, the per-share is not sticky. Then cut the material into a full-size block and put it into the feeding hopper, and then automatically feed it through the feeder.
5, start to discharge slightly slower, when the production of the twist is smooth, and then more material discharge. Twist from the nose, for a variety of coarse, thin, porous head core, you can produce a variety of thick and thin Twist.
6. After the machine is shut down, plug the outlet and the feeding hopper with tarpaulin or plastic cloth to avoid the surface being dry or blocked when the next production is resumed.
7. Stop the feeding before stopping. After the remaining material is finished, remove the inner ring gear with a wrench and clean the remaining surface of the machine head for the next use.
Our Heterocyclic Compounds has been developing from 2015 year, it is a relatively new class of compounds in our company. Our heterocyclic compounds conducted by a dedicated research and development teams. The R & D team focused on researching heterocyclic compounds, other products are performed by other technical team. Our goal is to catch up with the industry's professional heterocyclic manufacturer. At present our products are mainly composed of pyridine, pyrimidine, thiazole. In addition to our regular products, we accept any form of customized services, to undertake from grams to tons of production. After receiving inquiry, we will give a quotation within 2 working days with coa specifications,If you have special requirements, please provide details in the mail, we will combine the specific requirements and provide an accurate accounting of the costs of the offer. Under normal circumstances, we have the longest production cycle is not more than 45 days.
Heterocyclic Compounds
Heterocyclic Compounds,Cyclopropanecarboxylic Acid,Benzenedithiol Dihydrochloride
Taizhou Volsen Chemical Co., Ltd. , http://www.volsenchem.com