Automatic turning air dryer operation precautions

Automatic turning air dryer operation precautions

When using the automatic turning air dryer, the user should understand the working principle of the automatic turning air dryer. The following is the operation precautions for the automatic turning air dryer:

The first is the combination of material and moisture is the factor that determines the ease of drying, and also determines the level of energy consumption and the length of time spent inside the dryer equipment. This situation is inseparable from the selection of drying equipment. For example, for some materials that are not easy to dry, it is mainly necessary to give a longer residence time instead of strengthening the external drying conditions.

The second is the form of the material. Materials can exist in a variety of forms, such as large shaped wood, ceramics, or other sheet, fibrous, granular, or even liquid materials. These can be used as materials that need to be dried industrially. Therefore, the choice of drying equipment should also be considered according to the shape of the material.

Again, look at some of the physical properties of the material itself. The physical properties of the material itself generally include density, bulk density, heat capacity, and adhesion of the material. In particular, the degree of adhesion has a direct effect on the operation of the drying equipment. When the adhesion is severe, the drying process cannot be carried out.

After zui, you need to pay attention to some precautions during the drying process. These factors mainly include the heat sensitivity when heated, and some materials may undergo some changes when heated, such as discoloration, decomposition and deterioration. In addition, the material will be deformed or cracked due to shrinkage during the drying process, resulting in a decrease in material quality or even scrap.