Beijing Shuiwan|Water Pill Machine-Water Pill Making|Small Water Pill Machine-How to Make Water Pills:
The water pill machine is suitable for small pharmaceutical factories, medium-sized pharmaceutical factory trial rooms, Chinese medicine research institutes, hospitals, private clinics, Chinese medicine stores, on-site processing and sales points, food factory pellet food development and other units . Shuiwan machine small size, light weight, can be a multi-purpose machine, stable performance, simple, easy to clean, safe energy saving, low-noise, attractive appearance, and an outer portion in contact with the drug all made of stainless steel, GMP standard. It can produce water pills , and can also be used for coating, drying and polishing of pelleted foods.
Beijing Shuiwan|Water Pill Machine-Water Pill Making|Small Water Pill Machine-How to Make Water Pills Technical Parameters:
1. Function: It can produce water pill and pelletized food coating, drying, etc.
1. Function: It can produce water pill and pelletized food coating, drying, etc.
2 , pelleting specifications: 0.2-8 mm
3 , production volume: 2-15 kg / hour
4 , motor power: host power: 0.37KW, heating plate power: 1.2KW
5 , motor shaft speed: 1440 rev / min
6 , size size: 560 × 600 × 780mm
7 , weight: 40kg
Beijing Shuiwan|Water Pill Machine-Water Pill Making|Small Water Pill Machine-How to Make Water Pill Instructions :
First, matters needing attention
1. Before operating this water pill machine, please read this entire manual, and should be retained for future reference.
2. Any modification that is not approved by the authority shall result in the inability of the water pill machine to operate , and the responsibility shall be borne by the user.
3. When operating , there should be no other unrelated items on the work surface. Shuiwan machine placed on a sound table, in a case where confirmation power supply voltage, the power supply should be close to the table, the outlet will be a reliable ground line, power line drawing force is prohibited in order to prevent tipping man, machine broke pill and Other accidents occurred.
4. When the water pill machine is finished , please turn off the power of the water pill machine.
5 , can not overload the water pill machine socket , otherwise it will cause fire or motor damage.
6. Do not put foreign objects in the water pill machine work, so as not to damage the water pill machine.
7. If the power cord is damaged (such as bare wire exposed, etc.) , please replace the dedicated power cord or go to the local office maintenance department to purchase and replace. In case of failure of a switch or socket must stop using do not change the line to continue to use, should be replaced with the specifications of the beginning or the outlet to avoid the mechanical, physical accident.
8. The applicable ambient temperature of this machine is -5 °C to 40 °C , and the relative humidity is less than 90% . There is no conductive dust and corrosive metal gas around , and it is placed in a ventilated and clean place.
9, when the unit is not in use must be placed in a reliable, clean location to be used, the exposed portion is coated pill should apply a small amount of edible oil in dry cleaning, to prevent rust.
10 , after each shift , you should promptly clean the inside of the water pill machine. When cleaning the machine, it must cut off the power, unplug the power cord to avoid personal injury. It is strictly forbidden to wash the whole machine or electric heater directly with water. When the unit is not in use, it must be placed in a dry, clean and ventilated place. In the course of the electric heater, non-contact with water, in order to prevent the conductive, causing electric shock accidents.
11, the unit supporting the grinding equipment can choose our medicine flow-LH-08B mill or to XFB-400 g of 500 g of Chinese medicine grinder swing.
Second, the structural characteristics
1. This machine is composed of components such as pelletizing drum, motor and heater.
2 , a multi-purpose machine , easy to remove and wash.
3 , small size.
4 , light weight.
5 , stable performance.
6 , easy to operate.
7 , low noise.
8 , beautiful shape.
9 , easy to clean.
10 , safe and energy saving.
11. The parts in contact with the drug and the outer casing are all made of stainless steel and comply with GMP standards.
Third, the operating instructions
1. Before using the unit, turn on the power, turn on the switch, and turn the machine for 1-2 minutes to confirm that the machine is running normally before starting work.
2. Wipe the inner wall of the roller and the part where the pill is in contact with medical alcohol, and do disinfection.
3 , preparation before pelleting, mold: After the millet is cooked, use a standard sieve to remove larger particles, and screen out smaller particles of uniform size. Sprinkle a layer of powder on the surface of the screened millet and shake the sieve to wrap the layer of Chinese medicine powder on the surface of the millet. At this point, the mold required for the water pill is formed.
4. Pour the mold into the roller of the water pill machine, open the machine, make the mold move circularly in the drum, sprinkle the Chinese medicine powder on both sides of the drum with a long spoon, and spray the water to the bottom of the drum with a watering can. Repeat this step continuously to allow the mold to roll continuously until the desired size of the water pill is formed. Note: During the operation, a small spoon can be used to remove a small pill and observe whether the pill has reached the required size.
5 , discharge: use the random plastic brush and shovel into the drum, the water pill that is still doing circular motion will fall into the shovel, you can take out the pill. Note: The machine can't stop running during the discharge process, otherwise it will affect the shape of the water pill.
6. Polishing method: Put the filtered water pill into the drum to make the water pill continuously roll. The longer the rolling time, the smoother the surface of the water pill.
7. Drying method: When the water pill is in the polishing process, the electric heating switch is turned on, and the pill can be dried.
Â
Fourth, machine parts
name | Number of accessories | Remarks |
power cable | 1 | Dedicated power cord |
Long spoon | 1 | Daily necessities |
Plastic shovel | 1 | Daily necessities |
brush | 1 | Daily necessities |
Water sprinkler | 1 | Daily necessities |
Â
Â
Â
Five, common faults and troubleshooting methods
Common faults of this machine | cause | Method of exclusion |
The power must be turned off to perform the following operations | ||
1. After the machine is powered on, the motor does not rotate. | 1. The power cord is not in good contact or the power plug is loose. 2. Poor contact in the switch. | 1. Repair the power supply or change the plug of the same specification. 2 , repair or exchange the same size switch |
2. When the unit is working, the motor stops rotating suddenly. | 1 , capacitor short circuit | 1. Go to the local office maintenance department and have professional maintenance. |
3 , the heater fails to heat | 1. The plug is loose or the power cord is off. 2 , heater heating wire is blown | 1 Replace the same size plug or repair the power socket 2 , to the local office maintenance department, repaired by professionals |
Hunan Zhongcheng Pharmaceutical Machinery Factory provides you with water pill machines suitable for all pharmacies, clinics, pharmaceutical factories and hospitals. The quality is guaranteed, not satisfied with the return of seven days, one year warranty, lifetime maintenance, welcome new and old friends to log in to our company: Or directly: Consulting, our factory will provide you with more professional services!
Garlic Granules are exported to many countries.one container can load garlic flakes, garlic granule and Garlic Powder,we can pack the goods at customer's request.
Our produce from garlic flakes to garlic granule:
Garlic flakes--re-dry--flow away the garlic skin--select out the garlic flakes with dark spot by machine color sortor --produce to different size granule
Garlic Granule, 25 kg/carton
Products Description
1. Commodity name: Garlic powder
2. Features:
1) Specification: 80-100 mesh, 100-120 mesh
2) Color: 100% pure natural white, no obvious spot
3) Moisture: 6% max.
3.Packing:
a) Inner packing:12.5kg/2 aluminum foil bags
b) Outer packing: 25kg/ctn
4. Supply period: All year round
5. Conveyance: 18mts/20' FCL
Dehydrated Garlic Granules,Garlic Granules,Dried Garlic Granules,White Dehydrated Garlic Granules
JINING FORICH FRUITS & VEGETABLES CO., LTD. , https://www.forichgarlic.com