First, it should be observed whether there is oil leakage around the oil pan. If there is, you should continue to check if the oil pan screws are loose and loose. If it is loose, it should be tight. If there is any further oil leakage, seals should be replaced; secondly, observe whether there is oil leakage on both sides of the crankcase. If yes, it means there are foundry sand holes or cracks. The crankcase can be repaired or replaced by plastic repair. Thirdly, when the oil level in the oil pan is lower than the undercut of the oil caliper, the oil must be added in time. In addition, long-term high-load engine operation, the body overheating, can also lead to oil consumption. In this case, it is necessary to stop and rest until the temperature decreases. If the oil consumption phenomenon is very serious, and it still does not work according to the above measures, the reason should be that the piston ring sealing oil is not strict, then the piston ring should be replaced.
Air Hose,Make Up Brush Holder,Nail Brush Holder
Haosheng Pneumatic Machinery Co., Ltd. , http://www.nb-tattoo.com