How to bond rubber and plastic insulation board
Rubber and plastic insulation board is a kind of insulation material with very high usage rate. Its thermal insulation performance is very strong, and it is easy to cut, easy to install, low in price, safe to use, neither irritating to the skin nor harmful to health, but also preventing mold growth, avoiding bites of rats or rats, and acid resistance. It is resistant to alkali, has excellent performance and is widely used. So how does the rubber-plastic insulation board achieve insulation?
First of all, the material structure of the rubber-plastic insulation board is a closed foam structure, which has a small thermal conductivity and is not easy to spread heat. It has excellent heat insulation effect. When the outside temperature is very low, it generally does not have internal temperature. Greatly affected, the internal temperature is not easily absorbed, thus preserving the temperature.
Secondly, the material of rubber-plastic insulation board is excellent in material, saving materials, saving raw materials, not easy to absorb water, so that heat is not easily lost, and the product has high softness. In addition, this material has good fire resistance and will not easily appear. Deformed or burnt by fire, durable.
How to bond rubber and plastic insulation board Many people will not glue rubber insulation board. I don't know how to use glue. Then I will tell you how to use this glue to bond rubber insulation board.
Before using the glue, we need to shake the precipitated glue to make it turbid. In the actual installation, use a small can of glue to prevent it from evaporating too quickly. If necessary, pour the large can into the small can. Use, seal the tank when not in use. Before that, we should prepare a small brush. The tools are ready. We will start to bond the rubber insulation board. When using, the glue should be naturally dried. The correct method of measuring the dryness is “finger touch methodâ€. Touch the rubberized surface with your fingers. If the finger does not stick to the surface of the material and the surface of the material has no sticky feeling, it can be bonded. When bonding, just align the two surfaces of the adhesive interface for a while. If the placement time is too long, so that the two joints are not sticky when pressed together, then repeat the steps. Usually, each kilogram of rubber and plastic glue can be applied with two square meters of bonding surface. Under normal circumstances, the rubber and plastic insulation board is dried for 5 minutes, but in order to ensure that it can be solidified, we have to dry it for about twenty or thirty minutes, so that the rubber and plastic insulation board that is glued out will be strong.
The steps of bonding before the construction of rubber insulation board are absolutely essential, so you must keep in mind so that you can use it later.
Probiotics powder have been shown to be good bacteria in the gut, clearing out bad bacteria and also improving the body's immune system. There can be more than 500 types of bacteria in your gut. Probiotics are defined as active microbial products that contain sufficient quantities to alter the gastrointestinal flora of the host to produce beneficial effects. Common probiotics include Lactobifidobacterium, Lactobacillus plantarum, Lactobacillus acidophilus, bifidobacterium longum and so on.
Lactobacillus Reuteri,Lactobacillus Rhamnosus,Bifidobacterium Lactis Powder,Lactobacillus Acidophilus,Lactobacillus Plantarum
Xi'an Gawen Biotechnology Co., Ltd , https://www.amulyn-bio.com