After many years of production practice, the authors have proved that the use of broad bean stalks to cultivate straw mushroom, the yield is 2-3 times the raw material of rice straw, can be comparable with the cottonseed husk, per 100kg of raw materials after cultivation can produce fresh straw mushroom about 40kg, income more than 400 yuan.
1, raw material processing. After threshing, the stalks of the beans are dried thoroughly, and then spread on the ground with a mortar or a mechanically repeated rolling to break them into small pieces of 5-10 cm.
2, culture ingredients formula. Broad bean stalk 80%, dry cow dung powder 10%, wheat bran or rice bran 4%, rapeseed cake powder 2%, superphosphate 2%, gypsum powder 2%. Plus lime powder 5% (watered spices). PH value 9, moisture content 65%.
3, build a heap fermentation. Firstly, the broad bean stalks were fully pre-wetted with lime water, and the other auxiliary materials were mixed well with the cow dung powder and then pre-wet with 1:500 times carbendazim solution. When constructing the heap, first lay a layer of 20cm thick broad bean stalk, spread a layer of mixed auxiliary materials on it, and then spread a layer of broad bean stalks, add accessories, so piled into a height, width of 1m, unlimited length of the stockpiles, build a heap When water is not enough, lime water can be added in layers. After the stack is completed, the surrounding membranes will be moistened and fermented.
4, turn the heap. When the material temperature rises to 60°C, it can be turned for 48 hours. The method is to replace the raw materials inside and outside the material pile with each other, and build the piles to pile up. When the feed temperature rises again to above 60°C, it is kept for another 24 hours before it is turned again. There is a total of 3-4 turnovers and the total fermentation period is 7-8 days. Every time the stack is turned, it should be checked to adjust the moisture within the material, and lime water should be added when the water needs to be replenished. After the end of fermentation, the material is dark brown, soft and elastic, free of bacteria and insect pests, no smell of ammonia and acid, odor and other odors, there are a lot of high-temperature white actinomycetes, PH value of 9 and water content of 65% for high-quality culture material.
5, sowing germs. The use of "two-stage cultivation method" should be selected 24450.04cm polyethylene plastic bag loading material bacteria, with two layers of material broadcast three species, mycelium full bag and then remove the bag covered with fermented fire soil mushroom, yield higher. The use of a large bed planted suitable wave planting method sowing seeds, shop two layers of material broadcast two species, the material surface covered with 2cm thick nutrient soil, filming bacteria.
6, fruiting management. After sowing, the temperature of the material is controlled to be about 30°C, and after about 7-8 days, the mycelium can be filled with mushrooms. When a large number of bed bases are formed. The relative humidity of the air needs to be increased to 90% so that the primordium develops smoothly and expands. When the fruiting body grows to the size of broad beans, the water is sprayed 3-4 times a day. The water temperature should be appropriate to the natural temperature, and it cannot directly spray well water or deep water supply. , The water temperature is too low to cause a large number of dead mushrooms. After the water is sprayed, it should be properly ventilated to increase the oxygen supply, and it can be harvested after about 3-4 days.
7, harvest. When the color of the fruiting body is changed from dark to light, the fungus must be harvested in a timely manner if the veil tightly covers the vegetative cover or the vegetative curtain slightly separates from the stipe. Should be picked 2-3 times a day. Under normal circumstances, a total of 3-4 shiitake mushrooms can be harvested, with a production cycle of about 30 days.
All In One Vape device with 90W full-out power. Very huge vapor and great throat hit.
Priest AIO90 is the only All-In-One device from MARVEC. 90W full-power smart chip, fire fast, super explosive power. The advised lowest resistance is 0.1ohm, making super huge vapor. Made of aluminum alloy, carbon fiber design. Wearproof, no depigmentation. Other awesome styles are coming soon!
Dongguan Marvec Electronic Technology Co.,Ltd, was established in 2012, is a comprehensive technology enterprise specializing in the r&d,production, sales and service of high-tech healthy e-cigarettes. Marvec always insists on the spirit of independent innovation and pursuit of excellence, and aims to product healthy e-cigarettes, become a first-class international manufacturing and service enterprise. The company has a strong technical research and development and product production capacity, with solid quality control and perfect after-sales service, we have a stable customer base and a good reputation in the domestic and international market. The company has a number of international certification and technical patents, products through CE, ROHS, FCC and other international tests, our products are exported to various countries and regions of the world. We are willing to work with our partners around the world to create a healthy and free new life!
All In One Vape
All In One Vape,Starter Kit,90W Vape,In All In One Kit
Dongguan Marvec Electronic Technology Co.,Ltd , http://www.marvec-cn.com