When there are problems such as the processing quality or the decrease of production efficiency of household rice mills, first check whether the moisture content of the raw rice is too high or too low, and then adjust the machine according to different phenomena.
The rice bran is not clear. Adjust the speed of the fan so that it reaches the rated speed, adjust the air volume adjustment plate, increase the air volume; tighten the fan pulley to eliminate belt slippage; replace the fan impeller to ensure the air volume; check whether the vibration lever and tension spring fall off, and whether the vibration roller and the wheel are separated , and properly adjust the distance; check whether the shaker falls off.
In the fine grain, the grain content in the grain or rice increased. If fine grain is used to run grain or rough grain, the debris on the contact surface between the lid and the chassis shall be removed to lock the lid; repair or replace the rice screen; reinstall and adjust the wind deflector to increase the air volume and reduce the wind speed. If the grain content in the rice is increased, the inlet sill, rice knife, or pressure rake should be adjusted; replace the cover.
Production declines. Adjust the pressure of the white room to ensure that the spindle reaches the rated speed; replace the heavily worn roller and re-adjust the opening of the inlet and outlet plates.
Meter jammed. Adjust the opening of the inlet and outlet sampan plates; stop and inspect the screen holes for blockage; if the blockage should be cleared, make it clear, and clean up the export stuffs. Check the cause of belt slipping and remove it in time. The excessive amount of debris in the raw grain should be cleaned up.
The grain accuracy is not uniform. Replace the roller; use the rice knife to turn the head, adjust the surface, or replace the rice knife; avoid mixing and processing the raw grains of different varieties; correctly adjust the import rake board and export rake board.
Too much broken rice. Adjust the gap between the rice knife and the opening of the exit plate to clear the product; re-adjust the rotation speed of the roller; check the installation condition of the sieve and ensure the installation is correct.
Do not feed rice. Clear the feed inlet, clean the raw grain, remove the impurities in the raw grain; clear the screen holes; re-current phase modulation, such as three-phase wire connector connected wrong, will cause reverse, should be transferred over the reconnection.
Proteins are large biomolecules, or macromolecules, consisting of one or more long chains of amino acid residues. Proteins perform a vast array of functions within living organisms, including DNA replication, catalyzing metabolic reactions, responding to stimuli, and transporting molecules from one location to another.
We supply protein, which is generally consumed immediately before and after exercising, or in place of a meal. Some types of protein are to be taken directly before and after a workout, while others are to be taken before going to bed. The theory behind this supplementation is that bodybuilders, by virtue of their unique training methods and end-goals, require higher-than-average quantities of protein to support maximal muscle growth.
Vegetarian Protein Powder,Plant Protein Powder,Natural Protein,Natural Protein Powders
SINOCHEM PHARMACEUTICAL CO., LTD , http://www.sinochemnutrition.com