How does the mushroom not grow neatly?

During the bud period, the management measures were taken to urge the doors and windows of the mushroom house to open to enhance light and ventilation, spray water into the space, increase the relative humidity of the mushroom house air to about 90%, cool down to about 10°C, and loosen the bag mouth to induce The occurrence of mushroom buds, but this time must not be fully open the plastic film bag mouth, to prevent evaporation of the material moisture, affecting the formation of mushroom buds. A few days later, when the cotton-like mycelium or yellow water droplets appeared on the surface of the culture material, the bag mouth was opened, and after about 1 week, needle-shaped mushroom buds were gradually developed.

Domestication period When the fruiting body grows to about 1 cm, the water spray must be reduced or stopped, and the humidity should be controlled at about 75%. Ventilation cooling, adjust the temperature around 5 °C. After domestication, restore and maintain the temperature of the mushroom house at about 10°C to promote fruit body growth.

During the extension period, measures must be taken to promote the rapid elongation of the stipe. (1) Sleeve and straighten bag mouth. When the fruiting body grows to 2 to 3 centimeters, the extra film of the plastic bag mouth should be stretched to enhance straightening, which can limit the oxygen supply and increase the concentration of carbon dioxide. The purpose is to inhibit the opening of the mushroom cover and promote the elongation of the stipe. (2) temperature adjustment. The temperature is controlled at about 10°C. (3) Humidification. The relative humidity of the air should be maintained at 85 to 90%. Mushrooms should be sprayed with moisturizing water. The amount of water spray increases with the growth of fruiting bodies.

Leather Gloves

The leather gloves are usually 10.5-16 inches long, and it is made of split cow leather. The back of the hand is usually made of canvas. The cuff can be made of Rubberized cuff or Pasted cuff.

Its main performance is wear-resisting, thermal insulation. It can be protected the hand from injury.

It is widely used in porters, mechanical workers, gardeners, welders and so on.

Leather Gloves,Strengthened Welding Gloves,Heat Resistant Gloves,Pig Leather Glove

Greateagle Safety Products Co., Ltd. , https://www.greateaglesafety.com

Posted on