Rabbit hair storage should be "three avoidance": 1 Avoid storing in plastic bags. Rabbit hair is prone to heat and dampness, and it can become yellowish when it lasts for a long time. 2 Avoid high temperatures and prolonged exposure. Due to the high temperature, rabbit fibril fibers tend to crack and deteriorate. 3 Avoid prolonged stress. Because of heavy pressure for a long time, it will agglomerate and reduce the quality of the hair. Its scientific storage method is as follows.
1. Container storage: Choose a dry wooden box or carton, cover the bottom of the box with a layer of white glossy paper, put a sandbag with mothballs in the corners and the center, and then install the rabbit hair, and gently press it when the thickness is 20 cm. Let's take a look and put 4 moth balls in a box. After each 20 cm thick, it is lightly pressed and put into several mothballs. After the box is full, put a few mothballs on the top of the bag to cover it and store it in a ventilated and dry place 60 cm above the ground. Every 15 days, choose to open the trunk cover for 2 to 3 hours. If it is found that the rabbit hair is moist and mildewy, the rabbit hair should be removed from the sun for 1 to 2 hours and then left to dry for 4 to 5 hours. After the rabbit's hair is dried, it is packaged and stored.
2. Cylinder Storage: Choose a clean, dry cylinder (can't use salted cargo), put 1 layer of quicklime on the bottom of the cylinder, and put a 3cm thick circular board (drying agent) close to the bottom of the cylinder. Then lay a piece of white paper, put sandbags containing mothballs around the paper and in the center, and then put the rabbit hair in a cylinder according to the box storage method. After filling it with a clean gauze, put a few more mothballs on the cloth. Can be stamped and stored. Same as box storage, it should be checked once a day. 3, cupboard storage: first with dry cotton in the cupboard, laying a white or sheet on the above, put a mothball sand bag around the center and each, and then divided into grades of rabbit hair layers into the cupboard, each put A layer of rabbit hair, put evenly on a few moth balls Shabu bags, rabbit hair after full, closed the door to save. The storage method is the same as above. It should be checked once every 15 days and abnormalities should be handled promptly.
4, bag storage: The rabbit hair in a cloth bag, and put a few moth balls Shabu bags, hanging in a dry and ventilated place.
Grips can be made of materials like stainless steel, plastic, aluminium, silicon, etc. Tattoo Grips are used in together with
tube stems to form the grip that you hold a Tattoo Machine with. Stainless Steel Tattoo Grips require an autoclave to
properly sterilize. A barrier method to keep the tattoo grip clean like a tattoo machine bag can be used, however, it
is still necessary to properly sterilize all grips & tubes and needles via an autoclave if the intention is to reuse these products.
Magnum Tattoo Grips,Magnum Tattoo Tubes,Disposable Magnum Tattoo Grip,Stainless Steel Magnum Tattoo Grips
Redtop Tattoo Supply Co., Limited , http://www.redtop-tattoo.com